0-60 PSI Glow in the Dark Tire Inflator 56-262

QuickCar Tire Inflators put the same trusted gauge head on an inflator kit, so a tire can be filled, checked, and bled from one tool on the end of the air line. Steel braided flexible hose, a 45 Degree chuck, and a brass relief valve come standard. Dry...

0-40 PSI Glow in the Dark Tire Inflator 56-242

QuickCar Tire Inflators put the same trusted gauge head on an inflator kit, so a tire can be filled, checked, and bled from one tool on the end of the air line. Steel braided flexible hose, a 45 Degree chuck, and a brass relief valve come standard. Dry...

0-20 PSI Glow in the Dark Tire Inflator 56-222

QuickCar Tire Inflators put the same trusted gauge head on an inflator kit, so a tire can be filled, checked, and bled from one tool on the end of the air line. Steel braided flexible hose, a 45 Degree chuck, and a brass relief valve come standard. Dry...

0-60 PSI Dry Tire Inflator 56-260

QuickCar Tire Inflators put the same trusted gauge head on an inflator kit, so a tire can be filled, checked, and bled from one tool on the end of the air line. Steel braided flexible hose, a 45 Degree chuck, and a brass relief valve come standard. Dry...

Tire Inflator 0-40 PSI Dry 56-240

QuickCar Tire Inflators put the same trusted gauge head on an inflator kit, so a tire can be filled, checked, and bled from one tool on the end of the air line. Steel braided flexible hose, a 45 Degree chuck, and a brass relief valve come standard. Dry...

0-20 PSI Dry Tire Inflator 56-220

QuickCar Tire Inflators put the same trusted gauge head on an inflator kit, so a tire can be filled, checked, and bled from one tool on the end of the air line. Steel braided flexible hose, a 45 Degree chuck, and a brass relief valve come standard. Dry...

WeatherPack to MSD Distributor Adapter 50-207

Mixing ignition brands usually means cutting a connector off something expensive. QuickCar Wiring Adapters bridge the two standards instead, so the distributor and the harness plug together without splicing and either part can be swapped out later. This...

QuickCar Voltmeter Gauge 611-6007

A gauge you have to study is a gauge that gets ignored at speed. QuickCar Legend Series gauges keep it simple: a clean analog face, a bright pointer and LED backlighting, sold individually so a panel can be built or repaired one gauge at a time. This...

Aluminum Valve Core Tool 56-100

A valve core that will not come out cleanly turns a two minute job into a ruined stem. A dedicated core tool grips properly and does not round the core off. Machined from billet aluminum with a red anodized finish, compact enough to live in a pocket or a...

Medium/Soft Orange Biscuit 66-503

QuickCar Torque Link Bushings provide racers with a simple, effective way to tune torque absorber response for changing track conditions, vehicle setup, and driver preference. By controlling how the torque absorber reacts as power is applied, these...

Travel Indicator 66-512

A torque absorber is doing its job somewhere between full extension and full compression, but there is no way to know where without measuring it. This indicator makes the travel visible. A specialized tool for measuring the travel of small outside...

Throttle Return Spring Kit 65-096

A stuck throttle is the fastest way to end a race badly, and a single return spring is a single point of failure. A dual spring kit gives the linkage a backup. The chrome kit includes two springs, a bolt-on carb mount bracket, and a range of spacers to...

Dual Magnetic Pick-up Single Ignition 5 Switch Flag Panel 50-1714

QuickCar Dash Mount Switch Panels provide racers with a clean, organized control center for operating essential vehicle electrical systems from within easy reach of the driver. By bringing ignition, starting, accessories, and other race functions...

Replacement Key for 55-003 55-004

A removable key disconnect is a safety feature right up until the key goes missing, and then it is a car that cannot be started. Keeping a spare in the toolbox costs very little. A plastic replacement handle and key for the 55-003 master disconnect...

Replacement Handle & Screw for Master Disconnect Switches 55-55

A disconnect handle takes abuse from every direction and is the part a safety official reaches for first. A bent or broken one should be replaced before it is needed, not after. A direct replacement aluminum handle in a bright red epoxy coating, bolt-on...