Helmet Fan Harness 7ft 50-001
$31.95
- SKU:
- QRP50-001
- UPC:
- 819616012396
- Weight:
- 0.32 LBS
- Width:
- 6.10 (in)
- Height:
- 1.20 (in)
- Depth:
- 6.85 (in)
- Shipping:
- Calculated at Checkout
A helmet fan is only as reliable as the wire feeding it, and a hand-spliced lead is usually the first thing to fail once heat and vibration go to work. QuickCar's Helmet Fan Harness arrives as a finished assembly, so the connection from switch panel to fan is one less thing to think about mid-race. Red positive and black negative conductors are soldered and bound together in heat shrink for the strongest possible connection.
The 7 Foot harness comes with a preinstalled #10 eyelet for the toggle switch or circuit breaker and a 5/16 Inch eyelet for ground.
Features and Benefits:
- Wiring Harness - Helmet Fan, 7 Foot 50-001
- QuickCar's Helmet Fan Harness attaches a helmet fan installed in the drivers cockpit to the switch panel. Two wires, Red for Positive (+) and Black for Negative (-) professionally tied together in heat shrink and soldered to provide the best connection possible. Comes with preinstalled #10 eyelet to connect to a toggle switch/circuit breaker, 5/16 Inch eyelet for ground, and a 2 pin WeatherPack with opposite end to be installed on fan. All terminals come soldered with heat shrink/seals.
- Professionally soldered and heat shrink-wrapped wires.
- Preinstalled #8 eyelet for connection to a toggle switch/ circuit breaker.
- 5/16 Inch eyelet for ground connection.
- 2-pin Weatherpack connector with opposite end ready for installation on the fan.
Details:
- Size: 7 Foot
- Pins: 2 Pins
- Sold As: Each
Specifications
| Part Number | QRP50-001 |
|---|---|
| Cat 3 | Helmet Fresh Air System Components |
| Country of Origin | USA |
| Shipping Weight | 0.32 lb |
| Shipping Dimensions (L x W x H) | 6.85 x 6.1 x 1.2 in |
⚠ CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
QuickCar Racing Products Product Information Sheet